Q & As
| 121 - 135 out of 240 |
| |
| Engineering |
 |
sir, i want to become a marine engineer and i am in my 3rd year of mechanical engineer.when i complete my engg i will be above 24 years.which are the colleges offering courses for me to become a marine engineer.
No such instance springs to mind. However, you may get the list of institutions from the website www.dgshipping.com and from there investigate choices. It would be better to have other options in mind.
By: Ms. Jayanti Ghosh |
|
what is tool designing ?and future scope in it? .after completion of it where we can give services? what isapportunities in govt. sector.also speacially in railways?
The development of new industrial tools and the planning of the material and equipment to be used to make them, as well as the steps to be followed is known as "tool design." Tool Designers apply their specialized knowledge of mechanics and structures to the design or modification of the dies, jigs, fixtures and gauges that are used in the material processing and assembly operations of industrial tool production. This work requires detailed knowledge of shop operations and the characteristics of the material from which tools are made. Designers must also be familiar with production and inspection procedures.The particular job duties and responsibilities of tool designers vary from firm to firm. In smaller establishments, the position is filled by highly skilled and experienced tool and die makers but usually, however, the position is filled by a mechanical engineer, who works with a staff of engineering technicians. Your level of qualification would determine the range and nature of employment opportunities in the government and elsewhere. There are opportunities both at the technician level as also engineering level. Prospects are good as manufacturing sector where they are usually employed is doing very well.
By: Ms. Jayanti Ghosh |
|
Hi, I have done degree in aeronautical engineering, and having 2 years of experience in s/w company, please guide me how to get into Ministry of civil aviation? Does ministry conducts any exam for the same or i need to clear civil services exam for it. Thanks
Job opportunities exist and are on offer from some of the leading institutions, including many for them from Bangalore.There are job opportunities in various units of Defence Research and Development Organisation (DRDO), Indian Space Research Organisation (ISRO), National Aeronautics Laboratory, Civil Aviation Ministry, Indian Air Force (flying, engineering and education branches), Indian Army (Army Aviation), Indian Navy (Naval Aviation) and Bharat Petroleum (Aviation services), ONGC and Coast Guard, Hindustan Aeronautics Limited (HAL) etc.There are private companies like Taneja Aerospace and Aviation and more than 25 private sector airlines which require all levels of aeronautical engineers for their maintenance division. Job opportunities are also available in the civil sector as pilots, navigators, flight traffic controllers, aerodrome officers from organisations like Air India, Indian Airlines, private airlines, National Airports Authority of India and International Airports Authority of India. DRDO conducts DRDO Scientists Entry Test (DRDO SET through a competitive exam for direct scientist entry. You can visit DRDO's website .www.drdo.org & rac.drdo.gov.in for further details. -- Hena Naqvi
By: Ms. Hena Naqvi |
|
in which "graduate courses" and "advance/post diploma courses" i can take an admissiom after completion of diploma in electrical engineering? kindly, also state the name of universities and colleges. Kindly, give some information(Syllabi,Eligibilty & Month of Exam) of "Common Enterance Test(CAT)" taken by IIMs
You can take Associate membership of Institution of Engineers (AMIE) program for which the examination is conducted by Institution of Engineers India Limited (IEIL). The associate membership qualification of institution of Engineers is equivalent to B.E. / B.Tech. degree in engineering. Like any other graduate/engineering graduate, an associate member candidate can write examinations like Civil Services, Indian Engineering Services, GATE, GRE, etc. The candidates after earning a certificate in AMIE can choose for higher studies leading to Master's Degree in engineering or any other qualification. Alternatively, these candidates can start working with government / private organizations in their respective field of specialization or become entrepreneur. website: www.amieindia.net. You can also opt for a course from IEEE.
By: Ms. Hena Naqvi |
|
respected sir, I have completed my M.tech in mechanical engineering.For doing my Phd where can i go in abroad and what are their future prospects?Also let me know about the sholarships availiable.
Various universities of US, UK, Canada offer Ph D programme in mechanical engineering its a long list of institutions there. But for doing PhD from a foreign institution you would have to prepare a solid base, i.e. a concrete and innovative proposal and you have to prove that you have an intelligent mind and analytical skill. You may search the web for various institutions that offer Ph D in the required discipline.
By: Ms. Hena Naqvi |
|
sir, I am compleated my diploma in electrical engineering from Gujarat. Now I am working in Institute of Seismological Research at Gandhinagar. I want to do B.E in evining collage. Please tell me any name of collage/univercity in India from where I can do my B.E THANKS.
Having done Diploma, it will make sense if you seek admissions to such colleges that allow admission to second year under the lateral entry scheme for the Diploma Holders. Some of the institutions that allow students with Diploma Qualification admission into the second year of Degree courses are listed below (List is indicative). For detailed guidelines regarding the same, log onto http://www.aicte.ernet.in/regulation_1992.htm I. Guru Gobind Sing Indraprashtha University, Delhi (www.ipu.ac.in) . NIT,Kurushetra (nitkkr.org) III. YMCA Institute of Engineering ,Faridabad (www.ymcaie.in) IV. Engg. Degree courses in West Bengal through JEE conducted by Govt. of west Bengal V. Engg. Degree courses in Orissa through JEE conducted by Govt. of Orissa VI. Engg. Degree courses in Rajasthan through Board Of Technical Eucation, Rajasthan (www.techedu.rajasthan.nic.in). You may also log on to www.education.nic.in/dist_inst.asp
By: Ms. Dr. Reena kumari |
|
i am comleted my ITI from machinist trade academic year 2006-2008. After completion of this course,what further course are there to continue plz send the details.Thanking you.
You may approach the polytechnic nearest to you to try to get an admission to the three years Diploma course in Mechanical Engineering. Alternatively, you may start to work with a company in the trade in which you have acquired the skills and improve your skills on the job.
By: Ms. Dr. Reena kumari |
|
Hello Sir,I am final year student of mechanical engg., i wanted to know about the ONE YEAR POST GRADUATE DIPLOMA COURSE IN THERMAL POWER PLANT ENGINEERING offered by the NPTI,what is the scope of this course & which time of year its appliction procedures are started ?
You would find the relevant information and assurance you need about this course from the link http://www.npti.nic.in/pgdc_1.html. Applications are invited through notifications in Employment News/ Rozgar Samachar. The previous one was probably in September 2007.
By: Ms. Jayanti Ghosh |
|
respected madam ; i m doing my B.E(mech)and i m really confused about my P.G coarse . kindly guide me which coarse should i do and the reasons for the same . pls, also tell the colleges which are best suited for the coarse .
You can choose an appropriate course once you have identified your career goal - technical or something else. If it is a career along the same lines then go for M E/ M Tech. If you want to join the merchant navy then you have to pursue the one year pre sea training course or take up Trainee Marine Engineer course provided you fulfil the eligibility criteria as mentioned on www.dgshipping.com. The list of institutions offering this option would be given on the same website. You would also be eligible for the Master of Design courses at Indian Institute of Science, Bangalore (http://www.cpdm.iisc.ernet.in); IIT Bombay (www.idc.iitb.ac.in); IIT Delhi ( www.iitd.ac.in/center/iddc); IIT Guwahati (www.iitg.ac.in/design) and IIT Kanpur (www.iitk.ac.in/design) ,M Des Multimedia Design at Dhirubhai Ambani Institute of Information and Communication Technology, Gandhinagar ( www.daiict.in ); also some of the Post Graduate programmes in design at the National Institute of Design, Ahmedabad (www.nid.edu). Indicative examples. Another option would be the Bachelor of Law (LLB) with specialisation in Intellectual Property Rights at Indian Institute of Kharagpur( www.iitkgp.ac.in) or equivalent or MBA across many business schools including the IIT Schools of Management, NITIE etc which target engineering graduates. These are among the prominent options. The final decision would depend upon the fact of what course is most closely aligned to your abilities and goals.
By: Ms. Jayanti Ghosh |
|
Sir/medam I want to know about my further education. Actually I have complited my diploma in Civil Engg with distinction from Govt Polytechnic Delhi(2004 to 2007 Batch). Now I am working as a Junior engg with Delhi Metro Rail corporation Ltd. (PSU)from 2007. Actually I have no experience. Hence the question is From which institute I should have to get my Degree in civil engg
You can get the required information from http://www.amieindia.net.
By: Ms. Hena Naqvi |
|
dear sir my name is tanvir shaikh completed BE in ELECTRICAL 2006. iwants to know the various electrical design softwares like ETAP/PSCAD/PDS from where i cud learn this?
There are various tool rooms located across the India where you can learn CAD/ CAM or contact DOECC for appropriate course. Following is the list of tool rooms fucntioning under central/state governments 1.Central Institute of Tool Design, Hyderabad 2.Central Tool Room, Ludhiana 3.Central Tool Room & Training Centre, Kolkata 4.Central Institute of Hand Tools, Jalandhar 5.Hand Tool Design & Training Centre, Nagaur 6.Indo German Tool Room, Ahmedabad 7.Indo German Tool Room, Aurangabad 8.Indo German Tool Room, Indore 9.Indo Danish Tool Room, Jamshedpur 10.Central Tool Room & Training Centre, Bhubaneswar. Tool Rooms supported by States:- 1.Institute of Training & Tool Room, Lucknow. 2.Govt. Tool Room & Training Centre, Bangalore. 3.Tool Room & Training Centre, Delhi. 4.Govt. Tool Room and Training Centre, Mysore. 5.Tool Room & Training Centre, Mapusa (Goa). Premier systems integrator Tata Elxsi offers a complete range of CAD/CAM/CAE solutions - from concept design to end manufacturing of components and products - for Indian aerospace, automotive, heavy engineering, manufacturing, and white goods & electronics industries.
By: Ms. Hena Naqvi |
|
Respected Sir, I have complete my graduation from B.A since last year and i have done 6 month diploma in computer basics and perfect knowledge of computer but i want to do retail management to grow in marketing feild can i do this is this appropriate for me plz suggest me
Various Institutes/colleges of management offer diploma/degree in retail management. The IIMs across the country also have such courses. The institute of retail management offers online course of 35 hrs' duration entitled "Certified Retail Professional" You can log on to institute's website www.instituteofretailmanagement.com. Andhra University offers PG diploma in retail management. Web:www.andhrauniversity.info/retail/careeropp.htm
By: Ms. Hena Naqvi |
|
I have now doing diploma in plastic engg in goverment polytechnic nasik and i want to take admission in UICT bombay(Univercity Institute of Chemical Technology) for degree course so give me the information about it and also other career options.
A degree in plastic engineering shall certainly be a good option for you for a better future. Some of the institutions imparting degree in plastic engineering are listed below : West Bengal University college of Science & Technology, 92 Acharya Prafulla Chandra Road, Calcutta 700009 B.Tech. integrated 3 year post B.Sc.) M.Tech. Plastics, Rubber Tech. AssamTezpur University, Napaam, Tezpur 784028 Graduates with 50% with major as Chemistry Bihar Birla Instt.of Tech, MESRA, Ranchi - 835215 30 BE Polymer Uttar Pradesh *Harcourt Butler Technological Institute, Kanpur 20009 20 B.Tech.Plastic Tech. M.Tech. (Plastic Tech.) Delhi College of Engineerin New Delhi 110016 40 D.E. Plymer Scienmce & Chemical Technology Punjab Sant Longowal Institute of Engg. & Tech., Longowal 148106 Sangrur 30 B.Tech. Chemical with Polymer Gujarat LD College of Engineering, Ahmedabad 300015 10 20 B.E. Rubber Tech. B.E. Plastic Tech. Maharashtra University of Bombay, Deptt. of Chemical Technology, Matunga Road, mumbaai 400019 16 12 B.Sc. Polymer after 10+2 a 4 yr. course. B.Sc. Chemical Tech. (Polymers) is a Post B.Sc. Course *SSE College of Engineering & Technology, Near Shivaji Park, Akola 444001 30 B.Tech. Polymer Plastic Tech. Laxminarayan Institute of Technology, Nagpurt 440010 10 B.Tech Maharashtra Institute of Technology, Sr No.124, Kothrud, Pune 411038 60 BE Polymer Engg. (Diploma holders to IInd year) North Maharashtra University, Deptt. of Chemical Technology, Jalgaon 425001 15 Be Plastic Technology Kerala Cochin University, Deptt. of Polymer Science & Rubber Tech.,CUST, Kochi -68202 18 12 3 yrs B.Tech. for science graduates with PCM & 50% marks and pass in entrance test M. Tech. Polymer Tech. University College of Engineering, Ihodupuzha 685584 60 BE Polymer Technology Karnataka * Sri Jayachama Rajendra Copllege of Engg. Mysore 570006 40 Be Polymer Tamil Nadu Anna University, Madras Institute of Technology, Chromepet, Chennai 600044 15 B.Tech Rubber (Post B.Sc 70% PCM) Bhadristan Institute of Engineering, Tiruchirapalli 620024 30 BD Polymer Engg. Crescent Engg. college, GST Road, Vandalur, Chennai 600045 30 Be Polymer Technology
By: Ms. Dr. Reena kumari |
|
I have completed B.E. in biomedical engg. branch from SATI,vidisha(m.p.)[82.13%]. I want to know abt different careers,which i can opt in technical stream. also am i eligible for engineering services exam IN electronics and communication branch?
Biomedical engineers develop innovative biologics, processes, materials, devices and informatics to prevent, diagnose and treat diseases for patient's rehabilitation. Many of the biomedical engineers do research work along with professionals from life sciences, chemists, and medical scientists. The devices like artificial organs, prostheses (artificial devices to replace missing body parts), medical information systems, instrumentation, health management and care delivery systems, etc., are the contributions of the biomedical engineers. Thus, the engineers in this specialized field need to have a sound grounding in a basic engineering field like mechanical or electronics together with biomedical field. Here, the specialists are also concerned with developing imaging systems such as magnetic resonance, ultrasound and x- ray machines, and techniques and devices to automate insulin injections or control body functions. Biomedical engineers find employment with companies that manufacture equipment used in hospitals and diagnostic centers or centers for research and development, manufacturing, quality control and testing as also installation, maintenance or sales and marketing departments. They can also get jobs with large hospitals for selecting, handling and maintaining sophisticated equipments in addition to building customized devices for special needs or work in institutions involved in research. There are a few government agencies where you can get recruited for product testing, safety and establishment safety standards for devices. The notification regarding the Engg. Services exam was recently published in Emp. News. Please go through the same to find out about the eligibility conditions. The same can also be assessed at www.upsc.gov.in.
By: Ms. Dr. Reena kumari |
|
i wannt to become marine engineering what are its eliglbility cretia
For admissions to marine engineering courses the general eligibility criteria followed by most of the institutions is as below: You must have successfully completed the Senior Secondary Examination (10+2) or its equivalent with: . At least 60% marks in Physics, Chemistry and Mathematics (P C M), and . At least 50% marks in English either in Class X or Class XII However, you should keep track of the individual admission notifications by various institutes to get the exact eligibility criteria.
By: Ms. Dr. Reena kumari |
| |
|
« Previous  Result Page: 7 8 9 10 11 Next » |
| |
| This week on Employment News Weekly - 28 April 12 - 04 May 12 |
|
|
|
|
 |
|
